Page Nav




Hover Effects




Header Ad


Breaking News:


Ads Place


 WATER TREATMENT SOLUTIONS COOLING WATER TREATMENT The ongoing challenge of all industrial cooling water programs is to provide chemical pro...



The ongoing challenge of all industrial cooling water programs is to provide chemical programs that will maintain clean heat transfer surfaces. This means providing protection against corrosion, scale and biological fouling that will ensure continuous operation of equipment with minimal downtime. Cooling towers are vulnerable to a variety of contaminants that cause deposit formation such as mineral scales and sludge. Deposition interferes with heat transfer, increases corrosion rates, restricts water flow, and causes loss of process efficiency and production. To help combat these

We provide the following products
  • Scale Corrosion Inhibitors
  • Dispersants (Oil/ Bio)
  • Biocides (Oxidizing / Non-Oxidizing)
  • De-scaling Chemicals
  • Pre-commissioning Cleaning Chemicals
  • Side Stream filtration systems
  • Basin Sweeper systems


The quality of water is important to avoid damage to the boiler. The makeup water depending on its source may contain large amount of impurities and considerable amounts of dissolved oxygen.

This, if not treated, results in fouling of boiler heat transfer surfaces, corrosion and increases the fuel consumption. The pitting corrosion leads to boiler tube failures and might damage the downstream equipment.

We supply the following to address these problems:
  • Oxygen Scavenger
  • Scale Inhibitors
  • pH/Alkalinity Builders
  • Condensate Line Treatment
  • De-scaling Chemicals
  • Boiler Cleaner Chemicals
  • Water Softeners


Most chillers use water for heat transfer. Being operated at low temepratures, the system experiences more corrosion than the scaling. Micro biological fouling, corrosion induced by anaerobic bacteria is also a concen in most closed clooing circuits. So the water must be properly treated to prevent scaling, corrosion and biological growth.
To help you surmount these, we provide:
  • Corrosion Inhibitors
  • Biocides
  • Pre-commissioning Cleaning Chemical
  • Side Stream filtration system


Potable water (more commonly known as drinking water) is water that is safe enough for drinking and food preparation. According to the World Health Organisation, 91% of the world’s population had access to an improved drinking-water source in 2015, compared with 76% in 1990. Furthermore, since 1990, 2.6 billion people have gained access to an improved drinking water source.

Treatment for the production of drinking water involves removal of contaminants from raw water to produce water that is pure enough for human consumption, without any adverse health effects. These contaminants can come in various forms, including fungi, viruses, algae, bacteria or minerals like Iron.

To solve these problems, we provide:
  • Scale & Corrosion Inhibitors
  • Disinfectants – Chlorine, Chlorine Dioxide and Ozone
  • UV sterilizers
  • Copper Silver Ionization units


Swimming pool water must undergo treatment in order to remain clear and clean, free from harmful substances, bacteria, viruses, algae and other pathogens so that it is suitable for use by swimmers.
We provide the following to help you overcome those problems:
  • Chlorine/ Bromine
  • pH Control
  • Algaecides
  • Pool Clarifiers/ Flocculants


Dosing systems plays an important role in any water treatment applications. Chemicals added at the right concentration gives proper protection against scaling, corrosion and microbiological growths. It gives lot of benefits such as greater protection, saves lot of energy, manpower and down time.
We offer dosing systems for almost all applications
  •  Cooling tower: A Single reliable system consisting of dosing pumps for Scale and corrosion inhibitors and micro biocides. Monitoring of water parameters such as Conductivity, pH etc and maintaining the dissolved solids content by automatic bleed.
  •  Chilled water : Automatic dosing of Corrosion inhibitors and biocides.
  • Potable water : Automatic dosing of disinfectants and corrosion inhibitors along with real time measurement of disinfectant.
  • Swimming Pool : Automatic dosing of disinfectant and pH correction chemical is an essential part of swimming pool treatment in order to keep the water safe for all users throughout the day.
  • Tailor made dosing system according to the system requirement.

Powered by Blogger.

Ads Place

Simone Natalia Welcome to iancon, if you have anything to ask please ask via WhatsApp
Simone Natalia Hey there 👋 GoodDay! so let me know what's up and I'll be happy to find a solution 🤓 Looking for the best offer? 🤑 I'm happy to tell you about our fantastic sale - up to 40% discount! Let me know if you've got questions.
Chat WhatsApp